| Customization: | Available |
|---|---|
| Guide Rail: | Horizontal Guide Rail |
| Setting Mode: | Floor-type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| PRODUCT FEATURES | |||
| *THE SURFACE OF THE BEDWAYS IS SUPERSONIC FREQUENCY HARDENED. *GEARS PRECISELY GROUND TO REDUCE NOISE. *SPINDLE BORE 105MM. *NO NEED FOR CHANGE GEAR. |
|||
| TECHNICAL PARAMETERS | |||
| SPECIFICATION | LC500C/2000MM | ||
| CAPACITY | Max.swing over bed | 500mm | |
| Max.swing over cross slide | 300mm | ||
| Max.swing over gap | 710mm | ||
| Effective length of gap | 230mm | ||
| Center Distance | 2000mm | ||
| Bed Width | 405mm | ||
| HEADSTOCK | Spindle hole | 105mm | |
| Spindle nose | ISO-D8 | ||
| Spindle taper | Metric 113mm | ||
| Spindle speed(Number) | (12steps)36-1600rpm | ||
| FEEDS AND THREADS | Max.travel of top slide | 145mm | |
| Max.travel of cross slide | 360mm | ||
| Max.size of toolshank | 25*25m2 | ||
| Longitudinal feeds range | 65kinds 0.063-2.52mm/rev | ||
| Cross feeds range | 65 kinds 0.027-1.07mm/rev | ||
| Metric threads range | 22kinds 1-14mm | ||
| Inch threads range | 26kinds 2--28inch | ||
| Moudle threads range | 18kinds 0.5-7mπ | ||
| Diametral threads range | 24kinds 4-56D.P | ||
| TAILSTOCK | Dia.of tailstock sleeve | 75mm | |
| Taper of tailstock sleeve | MT5 | ||
| Max.travel of tailstock | 150mm | ||
| MOTOR | Main drive motor | 7.5KW | |
| Rapid traverse motor | 250W | ||
| Coolant pump motor | 90W | ||
| PACKING | L*W*H(2000mm) | 365*115*190cm | |
| WEIGHT | N.W/G.W(2000mm) | 3050/3350kgs | |
| ACCESSORIES | |||
| STANDARD ACCESSORIES | |||
| PART:INSTALL ON THE LATHE | |||
| Work lamp | |||
| Rapid travel | |||
| Coolant system | |||
| Thread-cutting dial | |||
| 3-jaw chuck(Φ250mm) | |||
| Moveable splash guard | |||
| Longitudinal touch stop | |||
| The apron touch stop lever | |||
| Foot brake and brake ribbon | |||
| Fixed steady rest(Φ6-125mm) & follow rest(Φ6-100mm) | |||
| PART:INSIDE THE PACKAGE WITH THE LATHE | |||
| Oil gun | |||
| Paddings | |||
| Face plate | |||
| Drive plate | |||
| Change gears | |||
| 4-jaw chuck(Φ320mm) | |||
| One whole set spanner | |||
| Dead centre and centre sleeve | |||
| Operation manual, packing list, test certificate | |||
| SPECIAL USE ACCESSORIES(OPTIONAL PIRCE) | |||
| Drill chuck set | |||
| Live centre(MT5) | |||
| Taper cutting function | |||
| Full-length splash guard | |||
| USA type quick change tool post | |||
| Italy type quick change tool post | |||
| Europe type quick change tool post | |||
| 2axis or 3axis Digital readouts(SINO) | |||
| 7.5KW main motor update to 11KW main motor | |||
| Big steady rest(Φ100-240mm)&Big face plate(Φ630mm) | |||
| CE-conformity(Chuck guard,Toolpost guard and leadscrew guard) | |||
| Cutting tool holders set(7pcs or 9pcs) | |||
){kind=link}