| Customization: | Available |
|---|---|
| Guide Rail: | Horizontal Guide Rail |
| Setting Mode: | Floor-type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| PRODUCT FEATURES | |||
| *THE SURFACE OF THE BEDWAYS IS SUPERSONIC FREQUENCY HARDENED AND PRECISION GRINDING. *GEARS PRECISELY GROUND TO REDUCE NOISE. *SPINDLE BORE 52MM. *NO NEED FOR CHANGE GEAR.THE MACHINE CAN TRUN KINDS OF METRIC, INCH, MODULE AND D.P. THREADS. |
|||
| TECHNICAL PARAMETERS | |||
| Model | LC410M/1000MM | LC410M/1500MM | |
| CAPACITY | Max.swing over bed | 410mm | |
| Max.swing over cross slide | 255mm | ||
| Max.swing over gap | 580mm | ||
| Effective length of gap | 190mm | ||
| Center Distance | 1000mm | 1500mm | |
| Bed Width | 250mm | ||
| HEADSTOCK | Spindle hole | 52mm | |
| Spindle nose | ISO-D6 | ||
| Spindle taper | MT6 | ||
| Spindle speed(Number) | (16steps)45-1800rpm | ||
| FEEDS AND THREADS | Max.travel of top slide | 140mm | |
| Max.travel of cross slide | 210mm | ||
| Max.size of toolshank | 20*20m2 | ||
| Metric threads range | 39kinds 0.2-14mm | ||
| Inch threads range | 45kinds 2-72T.P.I | ||
| Longitudinal metric feeds | 17kinds 0.05-1.7mm/rev | ||
| Longitudinal inch feeds | 17kinds 0.002-0.067inc/rev | ||
| Cross metric feeds | 17kinds 0.025-0.085mm/rev | ||
| Cross inch feeds | 17kinds 0.001-0.0335inc/rev | ||
| Moudle threads range | 18kinds 0.3-3.5mπ | ||
| Diametral threads range | 21kinds 8-44D.P | ||
| TAILSTOCK | Dia.of tailstock sleeve | 50mm | |
| Taper of tailstock sleeve | MT4 | ||
| Max.travel of tailstock | 120mm | ||
| MOTOR | Main drive motor | 2.2/3.3KW | |
| Coolant pump motor | 90W | ||
| PACKING | L*W*H | 2.05*100*165cm | 255*100*165cm |
| WEIGHT | N.W/G.W | 1200/1400kgs | 1500/1700kgs |
| ACCESSORIES | |||
| STANDARD ACCESSORIES | |||
| PART:INSTALL ON THE LATHE | |||
| 3-jaw chuck(Φ200mm) | |||
| Steady rest & follow rest | |||
| Work lamp | |||
| Coolant system | |||
| Full-length splash guard | |||
| Foot brake and brake ribbon | |||
| PART:INSIDE THE PACKAGE WITH THE LATHE | |||
| 4-jaw chuck(Φ250mm) | |||
| Face plate | |||
| Paddings | |||
| Change gears | |||
| Dead centre and centre sleeve | |||
| Oil gun | |||
| One whole set spanner | |||
| Operation manual | |||
| OPTIONAL ACCESSORIES | |||
| Live centre(MT4) | |||
| 2axis Digital readouts(SINO) | |||
| 3axis Digital readouts(SINO) | |||
| CE-conformity(Chuck guard,Toolpost guard and leadscrew guard) | |||
| USA type Quick change tool post | |||
| Europe or Italy type Quick change tool post | |||
| Drive plate | |||
| Thread-cutting dial | |||
| 4 position longitudinal touch stop | |||
| Magnetoelectrical brake | |||
| Drill chuck set | |||
| Taper cutting function | |||
| Cutting tool holders set(7pcs or 9pcs) | |||
){kind=link}